1- Inputs for simulation
Here are the checks that should be conducted before submitting simulation jobs to HPC:
Rupture
- Test: Extract Mw for all ruptures from SRF.info and plot them versus the Leonard relationship (2011- Table 6).
Pass criterion: if all the data sits on the one-to-one line, the magnitude of SRFs are correct.
Note: Make sure stable continental region (SRC) of is NOT used. Only use DS and SS equations from of Table 6 of Leonard (2011). - Test: Plot number of realizations for a given fault based on its magnitude versus the number of the SRF files exists in the corresponding directory for that given fault.
Pass criterion: if the values sit on the one-to-one line, the number of realizations are correct. - Test: Plot lower seismogenic depth of a given fault from national hazard model (Stirling et al 2012) rupture area for a given realization of SRF (extracted from SRF.info) versus the
- Number of realizations for a given fault based on its magnitude (cross check with the matlab code for number of realizations)
- Read SRF.info file for the generated SRFs and write the files into a text file for all of them
- Compare the output of SRF.info for all with the matlab code results
2- Velocity model:
3- Simulation:
4-
2- Outputs from simulation
Here are the checks on the obtained results from simulations:
1-