The text file (to run a Cyerbshake run)
...
containing all the faults in NZ based on Stirling
...
et al 2012 BSSA paper is NZ_FLTmodel_2010_Modified.txt .
Please note that Karim has editted the original file (This "modified" text file is based on the original NZ_FLTmodel_2010.txt) to address these issue:AkaOtaki : file. The modifications made are as follows:
| Fault | Modification |
|---|---|
| AkaOtaki | The number of Locations on the fault |
...
| trace is reduced to 5 for this fault |
...
| because one of the points was getting repeated |
...
| FiordMar1&2, HawkeBay5&11, HawkeBay6&12, Lachlan1&2, Waimarama1&2, Waimarama3&4 |
...
| The & sign |
...
| is replaced with a dash (-) for the name of these faults because it was creating problems in the file path. | |
| MokonuiSW, Ohena02, RangipoALL, RangipoN, Volkner05,Wairau, WhirinakiALL | Segments smaller than 1 km were removed as they were |
...
| problematic for the kinematic rupture generation |
| GeorgeR1 |
...
| The |
...
| 2nd point on the fault trace should have been -44.71667, NOT -45.71667 |
| MilB5GeoR2 |
...
| The 2nd point on the treace should have been -44.56667, and NOT -45.56667 |
...